Images are representations only.
AST44LP Pressure Transducer
Brand: American Sensor Technologies Inc
The AST44LP is a stainless steel pressure transducer with a wide variety of options.
With its rugged construction and the best price-to-performance ratio in the industry, the AST44LP is the solution for low pressure measurement in Intrinsically Safe areas.
Features- Class 1 Div 1 Groups C, D when Installed with an Approved Barrier
- ATEX / IECEx: Class I Zone 0 Exia IIB T4 Ga (Ta = -40°C to 80°C)
- High Strength Stainless Steel Construction
- No Internal O-Rings
- Wide Operating Temperature
- Pressures from 0-1 to 0-15 psi
- Low Static and Thermal Errors
- Unparalleled Price and Performance
- Compatible with Wide Variety of Liquids and Gases
Specifications
Accuracy
- < ± 0.25 % BFSL (< ± 0.5 % BFSL for 0-1 psi) at 25° C (77° F) Includes Non-Linearity, Hysteresis & Non-Repeatability
Ambient Temperature Range
- -40° to 80° C (-40° to 176° F)
Applications
- Control Panels
- Data Loggers
- External Tank Levels
- HVac Equipment
- Hydraulic Systems
- Industrial OEM Equipment
- Pneumatics
- Vapor Recovery
- Water Management
Approvals & Certifications
- ATEX/IECEx Class I Zone 0 T4, Exia IIB T4 Ga (Ta = -40° to 80° C)
- CSA 157 Class I, Div. 1, Groups C, D Intrinsically Safe
- UL ANSI / ISA 12.12.01 Class I, Div. 1, Intrinsically Safe Groups C, D (Formerly UL 913)
Bandwidth
- (-3 dB), DC to 1 kHz - for 1-5 Vdc, 1-6 Vdc
- (-3 dB), DC to 250 Hz - for 4-20 mA
BSP Connection
- 1/4" BSPP Male
Burst Pressure
- 5 x or psi: 75 (kPa: 517.1, bar: 5.171) whichever is less at 25° C (77° F)
Compensated Temperature
- 0° to 55° C (32° to 132° F)
Current
- 20 mA Typical at 4-20 mA Output - Current Consumption
- 5 mA Typical at 1-5 Vdc, 1-6 Vdc Output - Current Consumption
Electrical Connectors
- 6-Pin Bendix
- Cable
- Conduit, 10 ft
- Conduit, 2 ft
- Conduit, 4 feet
- Conduit, 6 feet
- DIN 43650A
- M12 x 1
- Mini DIN 43650
- Mini-Fast
- Packard Metripack 150 3-Pin
Environmental Protection
- Intrinsically Safe
- IP66
Excitation Voltage
- 10-28 Vdc
Humidity
- 0 to 100 % RH, Non-Condensing
Media
- Liquids & Gases
NPT Connection
- 1/2" NPT Male
- 1/4" NPT Female
- 1/4" NPT Male
Operating Temperature
- -40° to 80° C (-40° to 176° F)
Output
- 1-5 Vdc
- 1-6 Vdc
- 4-20 mA, 2-wire Loop-Powered
Output Impedence
- 10 kΩ at 4-20 mA Output
Output Load
- 0-800 ohms at 10-28 Vdc at 4-20 mA Output
- 10,000 ohms Min. at 1-5 Vdc, 1-6 Vdc Output
Output Noise
- < 2 mV RMS - for 1-5 Vdc, 1-6 Vdc
Pressure Cycles
- > 100 Million at 25° C (77° F)
Pressure Range
- bar: 0 to 1.034
- inH₂O: 0 to 207.6
- kPa: 0 to 103.4
- psig: 0 to 15
Reverse Polarity Protection
- Yes
RFI/EMI Protection
- Yes
Shock
- EN 60068-2-27
Span & Zero Effect
- < ± 1.5 % of Full Scale
Span Effect
- < ± 2 % of Full Scale Span Tolerance - for 4-20 mA Output
Stability
- ± 0.25 % of Full Scale Typical at 25° C (77° F)
Storage Temperature
- -40° to 100° C (-40° to 212° F)
Vibration
- EN 60068-2-6
- EN 60068-2-64
- IEC 68-2-32
Wetted Materials
- 316L Stainless Steel
- Hastelloy
Zero Offset
- < ± 1 % of Full Scale at 4-20 mA, 1-5 Vdc, & 1-6 Vdc Output
